Whirlpool ADG 130 Instrucciones de uso descargar pdf

-1-

Chart

PROGRAMS

SELECTION

BUTTON

Push “Programs”

button (repeatedly)

until the indicator of

the required

program lights up

(see “Table of

programs” - next

page).

BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!

HALF LOAD

BUTTON

Half load cycle can be

used for the upper or

lower rack. Select the

required program

then press the “Half

Load” button - the

light comes on. Turns

off at the end of the

program. The “Half

Load” option can be

used with the

programs indicated in

the table of

programs.

DELAYED

START BUTTON

The wash cycle

can be

programmed to

start after 2, 4 or 8

hours. Then press

the Start button.

The wash

program will start

after the set time.

START/RESUME

BUTTON

Push this button to

start the selected

program: the indicator

lights up and goes off at

the end of the

program. When the

door is opened during

a washing cycle, the

cycle is temporarily

paused: the Start

indicator blinks.

To resume the cycle

push Start button and

close the door within 3

seconds.

SALT

INDICATOR

When lit (at the

end of the

cycle), the salt

reservoir needs

to be refilled.

RINSE AID

INDICATOR

When lit (at the

end of the

cycle), the rinse

aid dispenser

needs to be

refilled.

5019 396 01914ADG 130

TABLET SETTING

This setting allows to

optimize the cycle

performances according

the type of detergent

used. Push the Tablet

button for 3 seconds

(until the indicator lights

up) if you are using the

combined detergents in

tablet (rinse aid, salt and

deteregent in 1 dose). If

you are using powder

detergent or liquid

detergent, the Tablet

indicator on the control

panel has to be off.

THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT CANCEL/OFF BUTTON.

FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.

CANCEL/OFF

BUTTON

Push this button to switch

off the control panel.

If pressed when a

program is running it

cancels the program

ongoing draining water

for 1 minute.

If pressed when the

dishwasher is switched

off it drains any possible

liquids from dishwasher

(1 minute process).

If the indicator flashes

repeatedly, see page 9 -

chapter ”What to do if ...”.

Quick reference guide

1 2 3 4 5 6 ... 11 12

Indice de contenidos

Pagina 1 - 5019 396 01914ADG 130

GB -1-ChartPROGRAMS SELECTION BUTTONPush “Programs” button (repeatedly) until the indicator of the required program lights up (see “Table of programs”

Pagina 2 - Table of programs

GB -10-What to do if...Crockery and cutlery... Possible causes... Solutions...are not perfectly clean/have food residues- Too little space between

Pagina 3 - Daily check

GB -11-What to do if...Crockery and cutlery... Possible causes... Solutions...have discoloured plastic parts- Tomato/Carrot juice. - Tomato sauce,

Pagina 4 - Daily use

GB -12-Precautions and general recommendations1. PackingThe packaging materials are 100% recyclable and marked with the recycling symbol .2. Removing

Pagina 5 - How to load the racks

GB -2-Chart1) Program data obtained in conformity with European standard EN 50242, obtained under normal conditions (without additional options) and m

Pagina 6

GB -3-First time use1- salt reservoir2- rinse aid dispenser3- detergent dispenser4- racks system5,6,7,8- available functions on the panel9- filters10-

Pagina 7

GB -4-Daily check3Daily useAdding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendationsOpen th

Pagina 8 - Maintenance and care

GB -5-How to load the racks4A - Two trays to load cutleryPosition 1 Position 2Load cutlery with the handle into the pins. Knives or cutlery with bulky

Pagina 9

GB -6-How to load the racks4D - CLOSEDD - OPENIn the upper rack you can load glasses, cups, bowls and, in the right side of the rack, you can load the

Pagina 10 - What to do if

GB -7-How to load the racks4Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn freely. Only use dishwasher

Pagina 11

GB -8-Switching off the appliance. Everything OK...Wash cycleSelect program678After the program is completed appliance turns into Standby mode automat

Pagina 12

GB -9-What to do if...If a fault occurs, before contacting the After-sales Service, make the following checks to try and remedy the problem.Most fault