
19
Care and Maintenance
Before cleaning or carrying
out maintenance, switch off
the appliance, disconnect the
mains plug and turn off the
water tap.
Cleaning the outside of
the appliance:
To clean the outside of the
appliance, use a neutral
detergent and a damp cloth.
Clean the control panel using
a damp cloth alone.
Do not use abrasive
detergents.
Cleaning the inside of the
dishwasher:
Regularly wipe the door seal
and inside of the door with a
damp cloth to remove any
food residue.
Upper spray arm:
1.
Slacken the fixing nut (by
turning it counter-clockwise)
and detach the spray arm by
pulling it down.
2.
Rinse the nozzles.
3.
Remount the spray arm by
aligning it with the rotary
mounting.
4.
Tighten the fixing nut by
turning it clockwise.
The fixing nut must be
tightened until it clicks!
Make sure the spray arm
rotates freely.
Lower spray arm:
1.
Remove the spray arm by
lifting it upwards.
2.
Rinse the nozzles.
3.
Remount the spray arm by
aligning it with the rotor pin
and insert it.
4.
Push the spray arm down
firmly until it is fixed in place.
Make sure the spray arm
rotates freely.
496gb94500.fm5 Page 19 Wednesday, July 4, 2001 11:19 AM
Comentarios a estos manuales