Whirlpool ACM 744/BA Instrucciones de uso descargar pdf (Pagina 5)

GB16

Timer selection

The timer can be used to set a max. cooking time of 99 minutes.

Select the cooking zone to be used with the timer (a dot lights up at the bottom right of the power level indicator), then set the required cooking time using the + and

- keys of the timer function: the time in minutes is shown next to the cooking zone display.

A few seconds after the key is pressed, the timer begins the countdown (the luminous dot of the selected cooking zone starts flashing).

Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically.

Control panel lock

This function locks the hob controls to prevent accidental switching on (e.g. during cleaning).

Press the key for three seconds: an acoustic signal sounds and an indicator light turns on above the lock symbol to confirm activation. The control panel is locked

with the exception of the OFF function. To unlock the controls, repeat the child safety activation procedure. The illuminated dot switches off and the hob is active again.

IMPORTANT: The presence of water, liquid spilled from pots or objects of any nature resting on the key below the symbol can accidentally activate or deactivate the

Control panel lock function.

Hold

This function allows you to temporarily hold and then resume cooking processes maintaining previous settings (except for timer setting). Press the key: blinks

on the display in place of the power levels. To resume cooking, press the key again.

Description of automatic functions

Simmering

The simmering function automatically sets the selected cooking zone to a minimum boiling temperature. After positioning the pot, switch on the hob and select the

chosen cooking zone. Press the key: “A” appears on the display and the indicator light turns on. To deactivate the function, simply press OFF on the slide

touchscreen.

Melting

This function maintains a permanently low temperature in the cooking zone. After positioning the pot/accessory on the chosen cooking zone, switch on the hob and

select the cooking zone. Press the key: “A” appears on the display and the indicator light turns on. To deactivate the function, simply press OFF on the slide

touchscreen.

IMPORTANT: do not use abrasive sponges or pan scourers. as they could ruin the glass surface.

• Clean the hob, when it is cool, after each use in order to remove any food residues.

• Sugar and foods with a high sugar content damage the glass ceramic surface and must be immediately removed.

• Salt, sugar and sand can scratch the glass surface.

• Use a soft cloth, absorbent kitchen wipes or a specific hob cleaner (follow the Manufacturer's instructions).

The hob features automatic functions for each cooking zone. The symbols of the available functions are shown next to the selection key of each cooking

zone. Every time an automatic function is selected, an indicator light turns on next to the symbol and the letter “A” appears in the cooking zone display.

CLEANING

WARNING

- Never use steam cleaners.

- Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”) is

not displayed.

501931902055.book Page 16 Thursday, June 4, 2009 4:21 PM