Whirlpool CHI 6640F IN Instrucciones de uso descargar pdf (Pagina 9)

EN15

At the first switch on, all the oven knobs 4, 5, 6 and 7 must be in the “0” position.

Switching the hob ON/OFF

Cook top is switched on rotating one of the knobs on the oven (4,5,6 or7)

To swich off rotate the knobs on the oven (4,5,6 or7) in "0" position.

If the hob has been in use, the residual heat indicator "H" remains lit until cooking zone have cooled down.

Switching on and adjusting cooking zones

When a knob (4,5,6 or7) is rotated the correlated zone is switched on with the power level corrisponding to the knob position.

The display will show the level as per knob position and the valueshowed will be updated according knob rotation.

Place the pot on the cooking zone, switching the hob on, activate the required zone by rotation of knobs on the oven 4, 5, 6 or 7

It is possible to select the required power level, from min. 0 to max 9 by rotation of knobs on the oven 4, 5, 6 or 7

Deactivation of cooking zones

To switch off the cooking zone, rotate the corresponding knob on the oven on "0" position.

The cooking zone switches off and, if still hot, the letter "H" appears on zone display.

Control panel lock (only with all Knobs on the oven in "0" position)

This function locks controls to prevent accidental activation of the hob. To activate the control panel lock, swich the knob on the oven in "0" position, press the lock function button

(key 6) for three seconds; an acustic signal and a luminous indicator near the padlock symbol signal activation

To deactivate the control lock, repeat the activation procedure. The luminous dot goes off and the hob is active again.

The presence of water, liquid spilled from pots or any objects resting on the button below the symbol can accidentally activate or deactivate the control panel lock.

Minute minder (key 5) The function does not shut off the zone

The minute minder can be used to set the time for a maximum of 99 minutes (1 hour and 39 minutes).

Press the minute minder and a beep signals the function. The display shows “00”. The minute minder value can be decreased and increased by keeping “+”

and “-” buttons pressed. When the set time has elapsed, an acoustic signal sounds. To deactivate the minute minder, keep the Timer button pressed for at

least 3 seconds.

Power levels FLEXI function

Cooking zone positioning

Cooktop operation

lamp

Level selector

FLEXI

Power indicator display

Cooking zone positioning

Booster button