Whirlpool ESDF 6040 FS Instrucciones de uso descargar pdf (Pagina 12)

ERROR CODE DESCRIPTION POSSIBLE CAUSES ERROR ELIMINATION

C81, C82

The control panel switches o

because of excessively

high temperatures

The internal temperature of

electronic parts is too high

Wait for the hob to cool down

before using it again.

F42 or F43

The connection voltage is wrong The sensor detects a discrepancy

between the appliance voltage

and that of the mains supply

Disconnect the hob from the mains

and check the electrical connection

F12, F21, F25, F36, F37, F40, F47, F56, F58, F60 Call the After-Sales Service and specify the error code

NOISES MADE BY THE HOB

Induction hobs can make whistling or crackling sounds during normal operation, these actually come from the pots and pans as a result of the characteristics

of the bottoms (for example, bottoms made of several layers of material, or uneven bottoms). These noises vary depending on the pots and pans used and

the amount of food they contain, and are not indicative of a defect of any kind.

In addition, the induction hob is equipped with an internal cooling system to control the temperature of electronic parts; as a result, during operation and

for several minutes after the hob has been switched off, the noise of the cooling fan will be audible. This is perfectly normal and indeed essential for proper

functioning of the appliance.

AFTER-SALES SERVICE

Before contacting the After-sales Service:

1. See if you can solve the problem yourself with the help of the “Troubleshooting guide”.

2. Switch the appliance off and then on again it to see if the problem has been eliminated.

If the problem persists after the above checks, contact the nearest After-Sales Service.

Always specify:

• a brief description of the fault;

• the product type and exact model;

• the Service number (the number after the word Service on the rating plate), located under the appliance (on the metal plate).

• your full address;

• your telephone number.

If any repairs are required, contact an authorised After-Sales Service Centre (to ensure the use of original spare parts and correct repairs). Spare parts are

available for 10 years.