Whirlpool HOB 461 S Instrucciones de uso descargar pdf (Pagina 30)

IMPORTANT:

• Never turn union “C” forcibly without first

slackening nut “A”. Never leave it in the

horizontal or vertical position.

• Gaskets “F” are the elements which

guarantee the gas connection seal.

Replace them when they are even slightly

deformed or imperfect.

• After the connection check the

connection seal with a soapy solution,

never with a flame.

ADAPTATION TO DIFFERENT

TYPES OF GAS

If a gas different from that indicated on the label

is used, adapt the hob to this new function.

Each hob comes with a set of injectors for the

various types of gas.

Injectors not supplied can be obtained from the

After-Sales Service.

Proceed as follows:

1. Replace the injectors with the correct ones.

2. Connect the hob to the on-off tap with a tube

which is suitable for the gas to be used

according to the regulations in force.

3. Adjust the gas burner minimum.

Replacing gas burner injectors

Choose the injectors to be replaced according to

the tables of page 90.

The injector diameter, expressed in hundredths

of a millimetre, is marked on the injector bodies.

To replace the injectors proceed as follows:

• Remove the grids and extract the burner

bodies.

• With a spanner replace nozzles “J” with

nozzles suitable for the gas to be used.

The burners are so designed that there is no

need to adjust the primary air.

INSTALLATION INSTRUCTIONS

82569_GB.fm Page 89 Wednesday, March 21, 2001 5:18 PM

Black process 45,0° 133,0 LPI

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Sin comentarios

Whirlpool HOB 461 S Instrucciones de uso Pagina 30