Whirlpool KEH 604 X Instrucciones de uso descargar pdf (Pagina 5)

INSTALLATION

Technical information for the Installer

This cooking hob can be embedded in a worktop 20 to

50 mm thick.

If another appliance is not fitted under the cooking hob,

insert a separator panel, at a distance of at least 90 mm

from the cooking hob bottom.

• If a vertical piece of furniture is installed, there must be

a gap of at least 100 mm between it and the edge of the

cooking hob.

Installation of cooking hob

• Apply the supplied gasket to the cooking hob (unless it

has already been fitted), after having cleaned its surface

as shown in the figure.

A - If the worktop is made out of wood, use the springs

supplied.

1. Fit the 4 springs into the relevant seat under the box.

2. Make an opening in the worktop, respecting the dimensions

indicated in the enclosed product description sheet.

3. Install the cooking hob in the worktop.

B - If the worktop is made out of marble or other materials

(plastics, ceramics or stone), the cooking hob must be fixed

by means of brackets , to be ordered from the After-

Sales Service (code 4819 310 18528).

1. Align the brackets with the bores and fix them with the

screws.

2. Make an opening in the worktop, respecting the dimensions

indicated in the product description sheet.

3. Install the cooking hob in the worktop.

• Before installing the cooking hob, remove the plastic

film that protects it, if present. The outer surfaces of

the furniture or appliances adjoining the cooking hob

must be heat resistant (heat protection “Y”, according

to standards EN 60335-2-6).

• Installation must comply with current local safety

regulations.

1 2 3 4 5 6

Sin comentarios

Whirlpool KEH 604 X Instrucciones de uso Pagina 5