Whirlpool KHPF 9010/I Instrucciones de uso

KHPF 9010KHPS 9010

The electrical connections must comply with currentlegislation and be carried out by a qualified, competentperson.• Information on the voltage and pow

Important: The following procedure mustbe carried out by competent technicalpersonnel only. The hob can be installedon, or into different types of ma

Note: Refer to the injector table to ensure the correct type ofinjector is to be fitted.Traditional burners (T)1. Remove the pan supports (A).2. Remov

To fit the double crown wok burner:Insert in the following order:1. burner ring (A);2. decorative covering ring (B);3. external burner cap (C);4. inte

Always disconnect the hob from the electricalpower supply and wait until it cools before cleaningand/or doing maintenance work. In order to keepyour h

If the hob is not working properly, work throughthis guide before contacting our Customer CareCentre.The burner does not ignite, or the flame isunstea

5019 719 01135Printed in Italyn02/07GB

Product description and symbols 4Using the burners 4Practical advice on using the hob 5Positioning the pan supports and wok support 5Hood and cabinetr

1. Removable pan supports2. 1 kWh auxiliary burner3. 1.65 kWh semi-fast burner4. 3 kWh fast burner5. 1.65 kWh semi-fast burner6. Professional wok burn

Read the instructions to get the best out of yourhob.• Use pans with a similar diameter to the burner(see the table on this page).• Use flat bottomed

Category II2H3+Electric Power: 230 V - 50 HzIf a hood is to be installed above the hob, refer to the hoodinstallation instructions to ensure the corre

To get the most out of your hob, please readthe instructions carefully and keep them forfuture consultation.• These instructions are only valid in th

PackingThe packing material is 100% recyclable and islabelled with the recycling symbol . Pleasedispose of all packing responsibly and carefully.Prod

Technical information for the installer• This appliance can be installed into a 20mm -50mm thick worktop.• If no oven is to be installed below the hob