Whirlpool LAM 1760 Instrucciones de uso descargar pdf (Pagina 10)

Control panel warnings

Residual heat indicator.

The hob is fitted with a residual heat indicator

for each cooking zone. These indicators alert the

user when cooking zones are still hot.

If the display shows , the cooking zone is still hot. If

the residual heat indicator of a given cooking zone is

lit, that zone can be used, for example, to keep a dish

warm or to melt butter.

When the cooking zone cools down, the display goes

off.

Incorrect or missing pot indicator.

If you are using a pot that is not suitable, not

correctly positioned or not of the correct

dimensions for your induction hob, the

message “no pot” will appear in the display (see

figure at side). If no pot is detected within 60 seconds,

the hob switches off.

Special functions

Some models have special functions:

Fast boil function (Booster)

This function, only present on some cooking zones,

makes it possible to exploit the hob’s maximum

power (for example to bring water to the boil very

quickly). To activate the function, press the “+”

button until “P” appears on the display. After 10

minutes’ use of the booster function, the appliance

automatically sets the zone to level 9.

Automatic function

The function automatically sets the power level to

maintain a light boil. Activate this function after

bringing to the boil, pressing first of all the cooking

zone button followed by button .

Demo Mode

This hob is equipped with a demo mode which allows

you to interact with the control panel without activating

the corresponding cooking zones. The activation and

deactivation procedure must be carried out within 60

seconds of the appliance being connected to the power

supply in the home.

To activate the demo mode, hold the two external

cooking zone selection buttons at the same time for at

least 5 seconds: “dE” appears on the central display. You

can now explore the control panel functions. The Lock

and Unlock function is active also in Demo Mode.

To deactivate Demo mode, repeat the procedure,

remembering first of all to disconnect the hob from the

mains and then reconnect it, carrying out the procedure

within 60 seconds of connection.

Activation/deactivation of the acoustic signal

After switching the hob on, press and hold the “+” button and the outermost selector button on the right

simultaneously for at least five seconds (“control panel lock”).

5 Sec

1 2 ... 5 6 7 8 9 10 11 12 13

Comentarios a estos manuales

Sin comentarios

Whirlpool LAM 1760 Instrucciones de uso Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool LAM 1760