Whirlpool TIG 7624 (MI) 400(T) Instrucciones de uso descargar pdf (Pagina 21)

Cooking with Cookeye®

When the contents of the pan reach the optimal

temperature, the hobs buzzer will sound, giving two

beeps every second. Putting food in the pan or

pressing the - and + buttons for the appropriate

hotplate will stop the buzzer (within 6 seconds).

For the WATER, MILK and SAUCE functions, cooking

takes place automatically, maintaining a constant

temperature until the programme time runs out. For the

BUTTER and OIL functions, manual control is resumed

to make temperature-setting more flexible. It is also

possible to programme the cooking time for these

functions. If nothing is done with the manual controls,

the automatic control maintains its temperature and the

buzzer continues to sound. If you do not interrupt the

automatic process within ten minutes, the hotplate

switches off.

It is possible to return to manual control at any

moment, regardless of the chosen function. Press the

- and + buttons simultaneously to interrupt

automatic control (all the power indicator lights will

flash).

! Do not use Cookeye® with a lid over the cookware or

a utensil inside it (ladle, spoon, whisk, etc.). Avoid

steam from the pan being blown towards the

Cookeye® lens, as this could disrupt its observation

function.

Programming with Cookeye®

! It is possible to programme minutes and seconds if

the total cooking time required is less than an hour. If

cooking time is over an hour, it is possible to

programme hours and minutes.

1. Activate Cookeye® as directed.

2. Press the

button corresponding to the hotplate

you want to programme.

3. Set the cooking time using the - and + buttons.

4. Confirm the settings by pressing the

button.

The set cooking time will flash until the correct

temperature for the selected function has been

reached. Once the food is inside the pan or one of the

- and + buttons has been pressed, the timer will

begin to count down. At the end of the cooking

programme, the buzzer sounds and the hotplate

switches off.

Switching off the Cookeye®

Press and hold the red button for 3 seconds.

Clipso Eye function

The Clipso Eye module should be used with the Clipso

Control pan to automatically regulate pressure and to

automatically switch the hotplate off after the cooking

programme has ended.

Starting the Clipso Eye function

! The Clipso Eye module can only be used with the

Clipso Control pan.

1) Insert the Clipso Eye into the space provided in the

Clipso pan.

2) Switch on the hob and put the Clipso pan on one of

the rear cooking zones.

3) Press the on/off button on the Clipso Eye. The

power indicators for the two rear hotplates flash and

the Clipso Eye function indicator light will switch on.

4) Select one of the 3 cooking programmes on the lid

of the Clipso pan.

5) Set the cooking time.

Infrared LED

On/Off button

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Comentarios a estos manuales

Sin comentarios

Whirlpool TIG 7624 (MI) 400(T) Instrucciones de uso Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool TIG 7624 (MI) 400(T)