Whirlpool BLZH 5069/IN Instrucciones de uso descargar pdf (Pagina 10)

13

Cleaning the oven and accessories

• When you finish cooking

wait for the oven to cool

and then clean it to

prevent the build-up of

baked-on residues.

• If the food residues are

baked on, use a specific

oven cleaner and follow

the manufacturer's

instructions.

• Clean the exterior of the

oven with a sponge and

warm water.

• Do not use abrasive

cleaners or pan

scourers.

• Use a liquid detergent to

clean the oven door

window.

• Wash the accessories in a

dishwasher or in the sink,

using an oven cleaner.

• After the oven has been

in prolonged use and

when cooking on

different levels (especially

food with high water

contents such as pizzas,

stuffed vegetables, etc.)

condensation may form

on the inside of the door

and of the door seal.

When the oven is cool,

dry any condensation

with a cloth or a sponge.

Removing the oven door

(for cleaning)

1. Open the oven door.

2. Press hinge catches (A)

forwards.

3. Lift the catches until they

engage and then remove

the door.

4. Warning: While you are

cleaning the oven,

ensure you do not

disengage the hinge

retainer catches.

5. Refit the oven door by

following the above steps

in reverse order.

Dropping the grill element

to clean the oven roof

(depending on model)

• Do not attempt to clean

the oven until it is cool.

1. To clean the oven roof, pull

out the grill element and

lower it as far as it will go.

2. Clean the oven roof and

then return the grill

element to its original

position.

Changing the oven lamp

1. Disconnect the oven from

the electrical supply.

2. Unscrew the lamp cover.

3. Change the lamp (see N.B.).

4. Refit the lamp cover.

5. Reconnect the electrical

supply.

Changing the lateral lamp

(depending on model)

1. Disconnect the oven from

the electrical supply.

2. Remove the left hand side

grid.

3. Use a screwdriver to prize

off the lamp cover.

4. Change the lamp (see N.B).

5. Reposition the lamp cover

and press it against the

oven wall until it clicks

into place.

6. Refit the side grid.

7. Reconnect the power

supply.

N.B: Use exclusively 25 W 230

V lamps, type E-14, T300°C,

available from After-Sales

Service.

4gb53171.fm5 Page 13 Wednesday, June 19, 2002 1:14 PM

1 2 ... 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios