Whirlpool XC 902 GH DC.3 (T) Instrucciones de uso descargar pdf (Pagina 23)

BURNERS AND NOZZLES SPECIFICATIONS

* At 15°C and 1013 mbar-dry gas

Propane G31 H.s. = 50,37 MJ/kg

Butane G30 H.s. = 49,47 MJ/kg

Methane G20 H.s. = 37,78 MJ/m

(situated under the hob or at the end of the instruction booklet).

Make sure that the local supply voltage corresponds to the

voltage indicated on the rating plate.

Connecting the supply cable to the mains electricity

supply

For models supplied without a plug, fit a standard plug,

suitable for the load indicated on the rating plate, onto the

cable and connect to a suitable socket. To connect directly

to the mains supply, a double-pole switch with a contact

separation of at least 3 mm suitable for the load and

complying with current standards and regulations, must

be fitted between the appliance and the mains supply outlet.

The yellow-green earth wire must not be interrupted by the

switch. The supply cable must be in such a position that no

part of it can reach a temperature of 50 °C above room

temperature. For installation above a built-under oven, the

hob and the oven must be connected separately to the

electricity supply both for safety reasons and for easy

removal of the oven if necessary. Do not use adapters or

shunts as they could cause heating or burning. Before

connecting to the power supply, make sure that:

• the limiter valve and the domestic system can withstand

the load from the appliance (see rating plate);

• the supply system is efficiently earthed according to

standards and laws in force;

• the socket or double-pole switch are easily accessible when

the appliance is installed.

Important: the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the wires in the mains lead may not

correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

Connect the Green & Yellow wire to terminal marked “E” or

or coloured Green or Green & Yellow.

Connect the Brown wire to the terminal marked “L” or

coloured Red. Connect the Blue wire to the terminal marked

“N” or coloured Black. FAILURE TO OBSERVE THE

ACCIDENT-PREVENTION REGULATIONS RELIEVES THE

MANUFACTURER OF ALL LIABILITY.

Replacing the cable

Use a rubber cable of the type H05VV-F with a suitable

cross section 3 x 1.5 mm². The yellow-green earth wire

must be 2-3 cm longer than the other wires.

ELECTRICAL CONNECTION

ENERGY LABEL

Directive 2002/40/EC on the label of electric ovens

Norm EN 50304

Energy consumption for Natural convection

heating mode: Convection

Declared energy consumption for Forced convection Class

heating mode: Fan assisted

TECHNICAL SPECIFICATIONS

Table 1 Liquid gas Natural gas

BURNER

Diameter

(mm)

Thermal power

kW (H.s.*)

By-pass

1/100

(mm)

Injector

1/100

(mm)

Flow *

g/h

Injector

1/100

(mm)

Flow*

l/h

Nomin. Reduc. G30 G31 G20

C.Rapid

100 3.00 0.7 40 86 218 214 116 286

B. Semi-rapid

75 1.65 0.4 30 64 120 118 96 157

A. Auxiliary

55 1.00 0.3 27 50 73 71 71 95

I. Double flame DC DR (internal)

30 0.90 0.4 30 44 65 64 74 86

I. Double Flame DC DR (external)

130 4.10 1.3 57 70 298 293 110 390

Supply pressure

Nominal

Minimum

Maximum

28-30

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 83 84

Comentarios a estos manuales

Sin comentarios

Whirlpool XC 902 GH DC.3 (T) Instrucciones de uso Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Hornos Whirlpool XC 902 GH DC.3 (T)