Whirlpool FWD71284SB EE Instrucciones de uso descargar pdf (Pagina 7)

User manual

CLEAN+

Clean+ is an option working on 3 dierent levels

(Intensive, Daily and Fast) that are specially designed to

set the right washing action, depending on your cleaning

needs:

Intensive: this option is designed for high levels of dirtiness,

removing most stubborn stains.

Daily: this option is designed to remove everyday stains.

Fast: this option is designed to remove lightly soiled stains.

INTENSIVE RINSE

By selecting this option, the eciency of the rinse is

increased and optimal detergent removal is guaranteed.

It is particularly useful for sensitive skin. Press the button

once, two or three times to select an additional 1, 2 or 3

rinses after the standard cycle rinse and remove all traces of

detergent. Press the button again to go back to the “Normal

rinse” rinse type.

START DELAY

To set the selected programme to start at a later time,

press the button to set the desired delay time. “Waiting”

or “Starts in” is indicated on the display when this option is

enabled. To cancel the delayed start, press the button again

until the value ‚‘‘--:--‘‘ is shown on the display.

EASY IRONING

By selecting this option, the wash and the spin cycles

will be modied in order to reduce the formation of creases.

ON/OFF

To switch on the washing machine: press the

“ON/OFF“ button, the “Start/Pause” button light up.

To switch o the washing machine during the wash cycle,

press and hold the button for approximately 3 seconds. If

the button is pressed briey or accidentally the machine will

not switch o.

To switch o the washing machine after programme end:

press the “ON/OFF“ button until the lights goes o.

KNOB

To select and conrm programmes. Turn to

select.

START/PAUSE

To start the programme, after you have nished your

settings. To pause a running programme. To continue a

paused programme.

KEY LOCK

To lock the control panel, press and hold the

“Key lock” button for approximately 3 seconds. When

the display visualises “KEY LOCK ON” the control panel is

locked (with the exception of the “ON/OFF“ button). This

prevents unintentional changes to programmes, especially

with children near the machine. To unlock the control panel,

press and hold the “Key lock” button for approximately

3 seconds .

FUNCTIONS

OPTIONS

BLEACHING

If you wish to bleach the laundry, load the washing machine

and set the “Rinse + Spin” programme .

Start the machine and wait for it to complete the rst water

lling cycle (roughly 2 minutes). Put the machine in pause

mode by pressing the “Start/Pause” button, open

the detergent drawer and pour the bleach (observe the

recommended doses indicated on the package) into the

main wash compartment where the partition was previously

mounted. Restart the cycle by pressing the “Start/Pause”

button.

If desired, it is possible to add fabric softener into the

appropriate compartment of the detergent drawer.

DEMO MODE

This function is only used for sales presentations. By this

you can interact with washing machine and see it working

without water. To enter Demo mode, switch the washing

machine ON and OFF again. Press and hold “Start/Pause”

button, then within 5 seconds press also “ON/OFF“

button and hold both buttons for 10 seconds.

To deactivate this function, switch the washing machine

OFF. Than press and hold “Start/Pause” button, within

5 seconds press also “ON/OFF“ button and hold both

buttons for 2 seconds.

! If the selected option is incompatible with the set programme, the incompatibility will be signalled by a buzzer (3 beeps) and

the wording “No Selection” will appear on the display.

! If the selected option is incompatible with another previously set option, the wording “No Selection” will appear on the display

and the option will not be enabled.

RAPID

If you select this option , the wash duration will be

reduced by up to 50% depending on the selected cycle,

thereby guaranteeing simultaneos water and energy saving.

Use this cycle for lightly soiled garments.

FRESHCARE+

This option enhances washing performance by

generating steam to inhibit the proliferation of the main

bad odour sources inside the machine. After steam phase,

the washing machine will perform gentle tumbling through

slow rotations of the drum. FreshCare+ option starts after

the cycle ends for a maximum duration of 6h and you can

interrupt it at any time by pressing any button on control

panel or turning the knob. Wait around 5 minutes before

door can be opened.

TEMPERATURE

Every programme has a predened temperature.

If you want to change the temperature, press the

“temperature” button. The value appears on the display.

SPIN

Every programme has a predened spin speed. If you

want to change the spin speed, press the "Spin" button. The

value appears on the display.

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

Comentarios a estos manuales

Sin comentarios

Whirlpool FWD71284SB EE Instrucciones de uso Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Lavadoras Whirlpool FWD71284SB EE