Whirlpool AKM995/BA Instrucciones de uso descargar pdf (Pagina 7)

INSTALLATION

Assembly

If the worktop is made of wood use the supplied spring clips

and screws to assemble the hob.

•

Position the four clips (

) as shown and at the specified

dimensions.

•

Secure the clips using the 4 screws (

•

Insert the cooking hob in the worktop (see figure).

If the worktop is made out of marble or other material

(plastic compounds, ceramics, stone etc.) fit the hob using

brackets suitable for this type of installation.

Install the hob in the worktop.

Position the four brackets (

) as shown in the figure, in

accordance with the thickness of the worktop.

Secure the 4 screws (

) in holes (

Very important reminders for cooling the electronic module.

To avoid overheating the electronic module, which could

decrease the effectiveness of the hob, it is advisable to assemble

the new induction hob following the instructions below.

If there is a drawer under the hob distance “

” must be at least

5 mm.

If an oven is to be installed (which must be of our manufacture

and have a cooling system) distance “

” must be 5 mm for HIGH

QUALITY ovens and 20 mm for others in the product range.

If the oven is positioned below the induction hob, do not use

the hob while the oven pyrolysis cleaning is running.

CABINET

OVEN

1 Air outlet opening min. 100 cm

2 Air inlet opening min. 100 cm

3 Insulation panel

3Gb60841.fm5 Page 18 Tuesday, September 18, 2001 5:55 PM

1 2 3 4 5 6 7 8

Sin comentarios

Whirlpool AKM995/BA Instrucciones de uso Pagina 7