Whirlpool HAR 642 D F Instrucciones de uso descargar pdf (Pagina 7)

Control panel lock

This function locks the controls to prevent accidental activation of the hob. To activate the control panel lock, touch

simultaneously the controls “Dual/Triple zone” and “boiling”; an acoustic signal sounds and a luminous indicator “Lo”

appears on the display. The control panel is locked except for the switching off function. To deactivate the control

panel lock, repeat the activation procedure.

The presence of water, liquid spilled from pots or any objects resting on the controls can accidentally activate or deactivate the control panel lock.

Timer

The timer can be used to set the cooking time for a maximum of 99 minutes (1 hour and 39 minutes) for all the cooking zones. Select the cooking zone to be

used, touch the timer “-” or “+” controls and a beep signals the function. The display shows “00”. The Timer value can be decreased and increased by keeping

the nger on the controls “+” or “-”. After the Timer value selection, the display continue to blink for 10 seconds before the countdown starts.

When the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically. To deactivate the timer, select the cooking zone,

touch the Timer controls “-” and “+” simultaneously.

IMPORTANT:

- The dot blinking next to the power level display shows that the Timer function is active on that zone.

- The Timer is available for all the zones but one at a time.

Residual heat indicator.

These indicators alert the user when cooking zones are still hot.

If the display shows , the cooking zone is still hot. If the residual heat indicator of a given cooking zone is lit, that zone can be used, for example,

to keep a dish warm or to melt butter.

When the cooking zone cools down, the display goes off.

Special function

Some models have special functions:

Button

Function

Name

Visual

Indication

Description

Dual/Triple

zone

1 or 2 LEDs switch on

The control activates the double or triple zone (if

available). After positioning the pot/accessory on the

chosen cooking zone, switch on the hob and select the

cooking zone. Select the power level and touch the

control one time to activate the dual zone or two times to

activate the triple zone. To deactivate the function,

simply touch the same button. LEDs above the controls

are switched on only when the function is active for the

selected zone.

Boiling

Display shows:

Melting

Display shows:

This function sets a power level that is suitable for slowly

melting delicate products without compromising their

sensorial quality (chocolate, butter, etc.). After

positioning the pot/accessory on the chosen cooking

zone, switch on the hob, select the cooking zone and

touch the melting control. To deactivate the function,

simply press the same button or touch "-" and "+" to

switch o the zone. It is possible to use this function in

combination with dual/triple zone function.

This function sets the zone maximum power (for

example to quickly bring water to the boil). After

positioning the pot/accessory on the chosen cooking

zone, switch on the hob, select the cooking zone and

touch the boiling controls. After 10 minutes of usage of

this function, the appliance automatically sets the zone

to level 9. To deactivate the function simply touch the

same control or lower the power level with "-". It is

possible to use this function in combination with dual/

triple zone function.

The hob is also equipped with the “auto shut off” function that switch off the cooking zone if no power level modication is done after a specic time frame

depending on the power setting itself. In the table there is the time duration of each power level.

Auto Shut O Time

110 hours

35 hours

53 hours

72 hours

91 hours

2 hours

4 hours

5 hours

30 sec

Power Level