Whirlpool K6G25S(W)/U Instrucciones de uso descargar pdf (Pagina 23)

Oven Light Button (M)

This button is marked by the

symbol and switches on

the light inside the oven so that you can monitor the cooking

process without opening the door.

The rotisserie

To start the rotisserie, proceed as follows:

a) place the dripping pan on the 1st rack;

b) insert the special rotisserie support on the 3rd rack

and position the spit by inserting it through the special

hole into the rotisserie at the back of the oven;

c) start the rotisserie using button “M”

Caution

Keep children away from the oven door when in use because

it becomes very hot.

Practical Advice on Using the Burners

To use the burners as efficiently as possible, some basic

guidelines should be followed:

• Use cookware that is the right size for each burner (see

table) in order to prevent the flame from spreading be-

yond the bottom of the cookware.

• Only use cookware with flat bottoms.

• As soon as the boiling point is reached, turn the knob to

the lowest setting.

• Always use lids with pots and pans.

Burner ø Cookware diameter (cm)

Fast (R) 24 - 26

Semi Fast (S) 16 - 20

Auxiliary (A) 10 - 14

N.B.: On models equipped with a reduction grid, the grid

should only be used with the auxiliary burner when

cookware with a diameter of less than 12 cm is used.

Electronic timer

The electronic timer displays the time and the timer function

with countdown.

Note: all the functions are operative approximately 7

seconds after they are stet.

How to reset the clock

After the appliance has been connected to the power supply,

or when the power has gone out, the clock display will

automatically reset to 0:00 and begin to blink. 0 00

• Press the

v button, and then use the s and t

buttons to set the correct time. To move the time

forward quickly, keep the buttons pressed.

Whenever the time must be reset, follow this same

procedure.

Timer Feature

Press the

n button to access this function. The symbol

"n" will appear on the display. Each time you press button

t, the time will increase by 10 seconds until 99 minutes

and 50 seconds. If you continue to press it, the time will

increase from minute to minute up to a maximum of 10

hours.

Use button

s to go backwards.

After setting the desired time, start the countdown. When

the time has elapsed, the buzzer will sound, and it can be

interrupted by pressing any of the buttons.

You can display the time by pressing button

v, and symbol

"n" indicates the timer function has been set. After

approximately 7 seconds, the display automatically goes

back to indicating the timer.

To cancel a previous setting

Press button

s up until 0 • 00.

Buzzer volume control

Once you have made and confirmed the clock settings,

use button

to adjust the volume of the alarm buzzer.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios

Whirlpool K6G25S(W)/U Instrucciones de uso Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool K6G25S(W)/U