Whirlpool KP9I96(X)/DE Instrucciones de uso descargar pdf (Pagina 47)

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply

before carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents (for

example, products in spray cans for cleaning

barbecues and ovens), stain removers, anti-rust

products, powder detergents or sponges with

abrasive surfaces: these may scratch the surface

beyond repair.

! Never use steam cleaners or pressure cleaners on

the appliance.

Inside the oven door:

When cleaning the appliance, do not use rough or

abrasive material or sharp metal scrapers to clean the

glass doors of the oven, as these may scratch the

surface and cause the glass to break.

Inside the oven *

• The inside of your oven is coated with a special self-

cleaning microporous enamel glaze which, at a

normal cooking temperature of between 200 and

300°C, oxidises and completely eliminates all

grease spots or other substances that inevitably

attack the inner walls of the oven. This way,

cleaning is kept right down to a minimum: as a

matter of fact, you just need to rub the surfaces of

the oven with a wet cloth regularly, after cooking, to

remove the thin layer of ash that may have been

deposited during cooking, in order to maintain the

self-cleaning property of the oven intact.

• After cooking where liquid has overflowed or when

the dirt has not been eliminated completely (for

example when grilling food, and the temperatures

reached are not high enough for the full self-

cleaning action of the enamel to be performed), we

recommend you leave the oven on at maximum

temperature so that all grease residue and the like

are eliminated.

• If, after long-term use, you find evident grease

stains deposited on the self-cleaning oven walls,

probably due to your failing to follow the above

maintenance advice, clean the surfaces thoroughly

with hot water and a soft cloth (do not use any

detergents), then rinse and dry thoroughly.

• Do not remove any dry caked-on grease using

sharp objects, as these could etch the self-cleaning

coating.

• If the self-cleaning surfaces inside the oven are

damaged or worn, due to incorrect or poor

maintenance or after many years of use, you can

request a kit of self-cleaning panels to line the

inside of the oven. To order these, just contact an

authorised Service Centre.

Oven exterior:

• Only clean the appliance when the oven is cold.

• The steel parts and especially the areas with the

screen-printed symbols should not be cleaned with

solvents or abrasive detergents. It is advisable to

use only a damp cloth with lukewarm water and

washing up liquid.

Stainless steel may remain stained if in long-term

contact with very calcareous water or aggressive

detergents (containing phosphorus).

It is therefore always necessary to rinse and dry all

surfaces thoroughly after cleaning.

Important: cleaning operations must be made

horizontally, in the direction of the steel glazing.

• After cleaning, any treatments to polish the surfaces

may be performed: only use specific products for

stainless steel.

Important: do not use abrasive powders, aggressive

detergents or acidic substances for cleaning.

Hob:

• The removable parts of the burners on the hob

should be washed frequently with warm water and

soap, making sure to remove any caked-on

substances. Check that the gas outlet slits are not

clogged. Dry the burners carefully before using

them again.

• Clean the end part of the automatic glow plug

ignitors of the hob and gas oven frequently.

Only available on certain models.

1 2 ... 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios

Whirlpool KP9I96(X)/DE Instrucciones de uso Pagina 47

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool KP9I96(X)/DE