Whirlpool SMP 658C/BT/IXL Guía de uso y cuidado descargar pdf (Pagina 10)

Use & Care guide

Error code Description Possible causes Solution

The control panel switches o because

of excessively high temperatures.

The internal temperature of

electronic parts is too high.

Wait for the hob to cool down before

using it again.

The connection voltage is wrong.

The sensor detects a discrepancy

between the appliance voltage and

that of the mains supply.

Disconnect the hob from the mains

and check the electrical connection.

Disconnect the hob from the power supply. Wait a few seconds then reconnect the hob to the power supply.

If the problem persists, call the service centre and specify the error code that appears on the display.

F81, F82

F02, F04

F01, F06, F12, F13, F25,

F34, F35, F36, F37, F41,

F47, F58, F61, F76

TABLE ERROR CODE

TROUBLESHOOTING

• Check that the electricity supply has not been shut o.

• If you are unable to turn the hob o after using it,

disconnect it from the power supply.

• During the pot recognition phase, the hob produces a

click sound, while during cooking, hissing or crackling

sounds may be heard. These noises may vary depending

on the accessories used and the amount of food that these

contain, and do not indicate any type of defect.

Please note: The presence of water, liquid spilled from pots or any

objects resting on any of the hob buttons can accidentally activate

or deactivate the control panel lock function.

SOUNDS PRODUCED DURING OPERATION

Hobs may produce noises during normal operation.

During the pot recognition phase, the hob produces a click

sound, while during cooking, hissing or crackling sounds may

be heard. Hisses and crackles actually come from the pots, and

are produced by specic features of the base of the pot being

used (for example, when a base is made from several layers

of material, or is irregular). These noises may vary depending

on the accessories used and the amount of food that these

contain, and do not indicate any type of defect.

Important:

• Do not use abrasive sponges or scouring pads as they may

damage the glass.

• After each use, clean the hob (when it is cool) to remove

any deposits and stains from food residue.

• Sugar or foods with a high sugar content can damage the

hob and must be immediately removed.

• Salt, sugar and sand could scratch the glass surface.

• Use a soft cloth, absorbent kitchen paper or a special hob

cleaner (follow the Manufacturer’s instructions).

• Spills of liquid in the cooking zones can cause the pots to

move or vibrate.

• After cleaning the hob, dry thoroughly.

If the iXelium ™ logo appears on the glass, the hob has been

treated with iXelium ™ technology, an exclusive Whirlpool

finish which ensures perfect cleaning results, as well as

keeping the surface of the hob shiny for longer.

To clean iXelium ™ hobs, follow these recommendations:

• Use a soft cloth (microbre is best) dampened with water

or with everyday glass cleaning detergent.

• For best results, leave a wet cloth on the glass hob surface

for a few minutes.

MAINTENANCE AND CLEANING

WARNING

1. Do not use steam cleaning equipment.

2. Before cleaning, make sure the cooking zones are switched o and that the residual heat indicator (“H”)

is not displayed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Comentarios a estos manuales

Sin comentarios

Whirlpool SMP 658C/BT/IXL Guía de uso y cuidado Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool SMP 658C/BT/IXL