Whirlpool TSE 774 IX Instrucciones de uso descargar pdf (Pagina 69)

Electrical connection

The electrical safety of this appliance can only be guaranteed if the latter is correctly

and efficiently earthed, in compliance with regulations on electrical safety. The

manufacturer denies all responsibility for damage resulting from a system which has

not been earthed correctly.

Before powering the appliance, check whether the technical characteristics featured

on the appliance data plate correspond with those of the electrical system (wire section,

protection devices), which should be suitable for the appliance maximal power.

Disconnect the appliance from the electricity supply before all operations.

You can connect your hob to the electrical system in two different ways:

• using a mains socket: use a socket conforming to the regulations in force in the

country where the appliance is fitted and accessible when necessary. Do not use

adaptors or multiple plugs, nor extensions.

• or by means of a junction box; if the appliance is connected permanently to the

mains, an omnipolar circuit breaker, accessible if necessary, with a minimum contact

opening of 3 mm should be installed.

Important

After connecting the appliance to the flexible cable, tighten all the screws on the terminal

board.

Make sure the jumpers are installed according to the type of mains system (see table

on page 15).

Terminal board

Jumpers

1 2 ... 64 65 66 67 68 69 70

Sin comentarios

Whirlpool TSE 774 IX Instrucciones de uso Pagina 69