Whirlpool VIX 644 CE M IT Instrucciones de uso descargar pdf (Pagina 11)



! Do not use of adapters, diffusers, metal plates.

They have a negative influence upon the

performance of the induction hob and they

impede that the moka function works properly.

! The function is only available for the front right

cooking zone.

! The auto-cooking sequence can be changed by the

user.

! Fill the bottom part of the moka with cold water

until reach the hole of the safety valve. Do not fill

over the valve.

! Use only ground coffee.

Selecting auto-moka function

The hob must be switched on. The cooking zone for

which the auto-moka function is to be selected must

be switched off.

1. Touch the moka function by pressing the moka

key. Moka led is on and the cooking zone display

alternatively blinks u

symbol and 3 (moka size).

2. Press the cooking zones (+) or (-) keys to select

the desired moka size sequence (3, 4 or 6). The

cooking zone display alternatively blinks u symbol

and the selected number (moka size).

3. The auto-moka function starts 5 seconds after

selecting the auto-moka function.

4. A beep sounds and the moka led and and cooking

zone led start blinking; the cooking zone display

shows the current step power level; the timer display

shows the total time as a counting down time, as

minutes (from 01. to 99.) and as seconds (from 00

to 59) the last minute.

The auto-moka function consists of a sequence of 3

“power level for a time” steps. The factory settings

are shown in the next table:

Moka Size 3 cups 4 cups 6 cups

step (Power

Setting, Time)

P, 50sec P, 75sec

155sec

step

(Power

Setting, Time)

7, 20sec 7, 20sec 8, 20sec

step (Power

Setting, Time)

6, 150sec 5, 90sec 7, 80sec

Total Time 220sec 185sec 255sec

When the auto-moka function sequence is

completed 3 beeps sounds; the moka led is switched

off; and the cooking zone display shows a 0.

! The factory settings have been calculated with

moka filled with water at 17ºC up to the level of the

pressure relief valve, with mains voltage set at 220V.

! If the moka pot is not placed over the cooking zone,

the display alternatively blinks no pot indication and

current power level. Meanwhile the auto-moka

function continues. If the moka pot is not placed over

the cooking zone before one minute the cooking

zone display shows a 0.

! At the end of the cycle there will still be some water

in a lower part of moka to avoid overheating of the

moka.

Recording new auto-moka sequence

It is possible any time to record a new moka

sequence for any of the moka sizes.

Any new moka sequence must consist of a

maximum of 3 steps of power level, beyond an error

beep shall sound. The maximum total time that is

going to be recorded is 10 minutes, beyond an error

beep shall sound.

The hob must be switched on. The cooking zone

must be switched off.

1. Touch the moka function by pressing the moka

key. Moka led is on and the cooking zone display

alternatively blinks u

symbol and 3 (moka size

sequence).

2. Press the cooking zones (+) or (-) keys to select

the desired moka size sequence (3, 4 or 6). The

cooking zone display alternatively blinks u symbol

and the selected number (moka size).

3. Press simultaneously the cooking zones (+) or (-)

keys (don’t let pass 5 seconds to avoid the function

start).

0 blinks in the cooking zone display and 00

the timer displays. The rec/play indicator led blinks

next to the cooking zone display.

Set the first step power level. Recording begins.

The total time that is being recorded is visualized as

a counting up time.

5. Change the power level as desired any time.

Recording continues.

When the coffee is ready touch simultaneously the

cooking zones (+) or (-) keys to record the cooking

sequence. The touch pannel will be automatically

locked. To unclock the pannel press and hold the

Control Panel Loock button.

! The time is visualized as seconds (from 00 to 59)

the first minute, and as minutes (from 01. to 10.)

after.

! The recording stops if power level 0 is selected. 0

power level shall not be recoded as intermediate

step.

The moka function is cancelled in case that a power

level 0 is maintained for 60 seconds.

The innovative automatic Moka function is designed to get

coffee automatically, combined with benefit of induction

technology. The cycle (different for 3-4-6 cups), once

activated, stops automatically and can be personalized.

! Use only stainless steel moka suitable for induction hob

with 80 mm minimum diameter of bottom part.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comentarios a estos manuales

Sin comentarios

Whirlpool VIX 644 CE M IT Instrucciones de uso Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool VIX 644 CE M IT