Whirlpool ACM 446 IX Instrucciones de uso descargar pdf (Pagina 6)

Electrical connection

Before connecting the appliance, make sure that:

1. the house electrical power supply nominal voltage matches that of the appliance, as given on the rating

plate;

2. the power supply line to which the appliance is connected is of adequate power with respect to the

max. power absorbed by the appliance, as given on the rating plate;

3. the house electrical system has a correct grounding system.

• An omnipolar switch with a distance of at least 3 mm between contacts must be installed.

NB: After installation, the electrical components must only be accessible with the use of a special tool.

The power cord must be of the H05RR-F type, in compliance with the table given below.

Instructions for the installer

Instructions

• Disconnect the power plug and close the gas tap before carrying out any repairs or operation.

• The qualified technician is responsible for correct installation according to current safety

regulations.

• Grounding of the appliance is compulsory by law.

The Manufacturer declines any responsibility for possible damage to persons, animals or things due to

non-compliance with the above mentioned regulations. The technical data is given on the rating plate

located on the inside of the drawer door. The adjustment conditions are given on a label applied on the

packing. Do not use the oven door handle grip for handling operations, or for removing the appliance

from the packing.

The appliance is in class 1.

Installation

IMPORTANT: The covering of the cabinets must be in heat resistant (min. 90°C) material.

If the appliance has to be installed near furniture, ensure the minimum spaces given in the following figure.

The appliance is equipped with 4 feet that are used for possible height alignment with the cabinets. To

fit them, tilt the appliance and screw the 4 feet in the special threads located in the corners (see fig. 1).

POWER SUPPLY VOLTAGE NUMBER OF WIRES x DIMENSIONS

1N ~ 230 V 3 x 1.5 mm²

Fig. 1

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Whirlpool ACM 446 IX Instrucciones de uso Pagina 6