Whirlpool AWM 6100 Instrucciones de uso descargar pdf (Pagina 11)

TROUBLESHOOTING GUIDE

This washing machine is equipped with automatic

safety functions which detect and diagnose faults

at an early stage and react appropriately.

Often, however, the faults detected are small

enough to be solved in a matter of minutes.

For example:

The appliance will not start, no lamp lights up.

Check whether:



the appliance is plugged in;



the wall socket is functioning correctly

(use a table lamp or similar);



a programme is selected correctly.

The appliance will not start, but the

Start/Pause lamp is flashing.

Check whether:



the appliance door is properly closed

(child safety);



the programme has been changed;



the water tap is open. If not, open the tap and

press the

Start/Pause

button.

The appliance stops during the programme.

Check whether:



the

Rinse Hold

lamp is on, terminate this

option by pressing the button again;



another programme has been selected.

Reselect the desired programme and press the

Start/Pause

button;

Start/Pause

lamp is flashing. Press

Start/

Pause

button;



Safety system of the appliance was activated.

See fault description table.

Detergent and additive product residues in

dispenser at end of wash.

Check whether:



the siphon is correctly installed and clean

(see Care and Maintenance);



enough water is being supplied. The mesh filters

between the inlet hose and the tap could be

blocked (see Care and Maintenance). Check

and clean the filter two or three times a year

(see Removing the filter).

Water hose mesh filter

Check and clean periodically.

For machines with a straight water supply hose A

Turn off the tap.

Unscrew the hose from the tap.

Clean the internal filter.

Screw the supply hose back onto the tap.

Unscrew the hose from the machine.

Remove the filter from the washing machine with pliers

and clean it.

Replace the filter and screw the hose connection back

on to the machine.

Turn on the tap and

ensure that the connections are

completely water-tight.

For machines with Water Stop hose B

Turn off the tap.

Unscrew the hose from the tap.

Clean the filter.

Screw the Water Stop hose back onto the tap.

Turn on the tap and

ensure that the connection is

completely water-tight.

3gb05149.fm5 Page 11 Wednesday, February 14, 2001 9:18 AM

Black Process Plate

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Whirlpool AWM 6100 Instrucciones de uso Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Lavadoras Whirlpool AWM 6100