Whirlpool ACM 704/NE Instrucciones de uso descargar pdf (Pagina 4)

Undercounter oven installation:

• If an oven (which must be of our manufacture) is to be

installed under the hob, ensure it is equipped with a

cooling system and observe the distances given in the

figure to the side.

• There must be nothing between the cooktop and the

oven (cross rails, panels, brackets, etc.).

Control panel

Switching on and adjusting cooking zones

After positioning the pot on the chosen cooking zone,

select the required power level by turning the knob

clockwise. Each cooking zone has different heat settings,

ranging from “1” (minimum power) to “9” (maximum

power).

When a knob is set to a power setting between 1 and 9 the

hob indicator light switches on.

Important! At the position indicated by a “______” on

the cooktop knobs there is no function: the heating

element is switched off.

Important! If no pot is placed on the hob or if the pot

used is not suitable for an induction hob, the cooking zone

selected will switch off after 1 minute. To reactivate it:

place a pot that is suitable for the induction hob (see

section “Before use”) on the desired cooking zone, turn

the knob to “0” and then select the desired heat setting.

Switching off cooking zones

Turn the knob to “0”.

When all the knobs are set to “0” (or to the line “____”)

the hob indicator light switches off.

Fig. 4

Fig. 3

Guard ACCESSORY AMH122

This accessory can be obtained from the After-sales

Service under Part N° 481931018436.

5mm

INSTRUCTIONS FOR USE

Power levels No function

Cooking zone positioning

Cooktop

operation lamp

Level selector

1 2 3 4 5 6

Sin comentarios

Whirlpool ACM 704/NE Instrucciones de uso Pagina 4