Whirlpool ACM 829/AL Instrucciones de uso descargar pdf (Pagina 11)

EN 11

After plugging the appliance into the electrical socket, in the rst 60 seconds it is possible to set the required power level by running the following points:

Step Control panel Display

Press for approximately 3 seconds both Power

management button (step 1).

Press the Power Management button (step 2) to conrm

the previous step.

The display shows .

Press to set the chosen level amongst the different options

available.

The light comes on together with the in-use lights for the

individual cooking zones.

Press the Power Management button (step 4) to conrm

the previous step.

The display shows the set level which flashes for

approximately 2 seconds; after which the hob emits an

acoustic signal and then turns itself off; it is now ready for use.

In case of an error when setting the power, the symbol appears in the middle and an acoustic signal sounds for about 5 seconds. In this case repeat

the conguration procedure from the beginning. If the error occurs again, contact the After-Sales Service.

During normal use, if the user tries to increase the maximum available power level when reached, the level of the zone in use ashes twice and an acoustic

signal sounds.

To obtain a higher power in that zone, it is necessary to manually decrease the power level of one or more already active cooking zones.

Activation/deactivation of the acoustic signal

After switching the hob on, press and hold the “-” of the rst cooking zone and the external button on the right simultaneously for at least ve seconds (“as

shown below”).

5 sec

Flexi cook

Where present, this function allows the cooking zone to be used as two separate zones or as a single extra large zone.

It is perfect for oval, rectangular and elongated pans (with maximum base dimensions of 38x23 cm) or more than one standard pan in the same time. In order

to activate the exicook function, switch on the hob, press simultaneously the 2 selecting buttons of the zones as shown in the picture below: the two cooking

zone displays show level “0”; both dots next to the level number are lit, indicating that the Flexi cook is activated.

To change the power level (from 1 to max. 9 or P) press the -/+ buttons. To deactivate the Flexi cook function, press simultaneously the 2 selecting buttons of

the zones. To switch off the zones instantly, hold one of the zone selection button for 3 seconds.

The message “no pot” will appear on the display of the zone that is not able to detect any pot (because of missing pot, or misplaced or not

suitable for induction hob). This message remains active for 60 seconds: in this time you can add or slide pots within the exicook area as you

prefer.

After 60 seconds if no pan is placed on the zone, the system stops “searching” pots on that zone, the symbol remains visible on the display to remind that

the zone is disabled.

To reactivate the Flexicook function, press one of the 2 respective buttons .