Whirlpool C 649 PV.3 (X)U Instrucciones de uso descargar pdf (Pagina 19)

• Replace all the components by repeating the steps in

reverse order.

c) Minimum regulation of the hob burners:

•

Turn the tap to minimum;

• Remove the knob and adjust the regulation screw,

which is positioned in or next to the tap pin, until the

flame is small but steady.

Burner and Nozzle Specifications

Table 1 Natural Gas GZ 50 Natural Gas GZ 35 GPB-B

Burner Diameter

(mm)

Thermal power

(p.c.i.*)

Nozzle

1/100

Flow*

l/h

Nozzle

1/100

Flow*

l/h

Nozzle

1/100

Flow*

g/h

kW (mm) (mm) (mm)

Triple Crown (TC) 130 2,8 133 297 197 413 91 233

Fast (Large)(R) 100 2,7 116 285 158 398 86 225

Semi Fast

(Medium) (S)

75 1,7 106 180 143 251 70 142

Auxiliary (Small)

(A)

55 0,9 79 95 106 133 50 75

Supply

Pressures

Minimum (mbar)

Nominal (mbar)

Maximum (mbar)

* A 0°C e 1013 mbar-dry gas

GZ 50 p.c.i. 35.9 MJ/m³

GZ 35 p.c.i. 25.8 MJ/m³

GPB-B p.c.i. 123.6 MJ/m³

C 649 PT.3 U C 649 PV.3 U

C 649 PT.3 XA U

N.B.: In the case of liquid gas, the regulation screw

must be screwed in all the way.

• Check that the flame does not go out when you turn

the tap quickly from high to low.

d) Regulating the primary air of the burners: the primary

air of the burners does not need to be regulated.

Important

On completion of this operation, replace the old rating

sticker with one indicating the new type of gas used. This

sticker is available from our Service Centres.

Note

Should the pressure of the gas used be different (or vary)

from the recommended pressure, it is necessary to fit a

suitable pressure regulator onto the inlet pipe in compli-

ance with current standards regarding “regulators for chan-

nelled gas.”

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

Comentarios a estos manuales

Sin comentarios

Whirlpool C 649 PV.3 (X)U Instrucciones de uso Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool C 649 PV.3 (X)U