Whirlpool SIM562BSK Instrucciones de uso descargar pdf (Pagina 8)

At the time of purchase, the hob is set to maximum power.

After plugging the appliance into the electrical socket, in the rst 60 seconds it is possible to set the required power level by running

the following points:

Step Control panel Display

The display shows

The light comes on together with the in-use

lights for the individual cooking zones

4 The display shows the set level which ashes

for approximately 2 seconds; after which the

hob emits an acoustic signal and then turns

itself o; it is now ready for use

Press for approximately

3 seconds

Press the ECO-logic button

to conrm the previous

step

Press to set the chosen level

amongst the dierent

options available

Press the ECO-logic button

to conrm the previous

step

In case of an error when setting the power, the symbol appears in the middle and an acoustic signal sounds for about 5

seconds. In this case repeat the conguration procedure from the beginning. If the error occurs again, contact the After-Sales Service.

During normal use, if the user tries to increase the maximum available power level when reached, the level of the zone in use

ashes twice and an acoustic signal sounds.

To obtain a higher power in that zone, it is necessary to manually decrease the power level of one or more already active cooking zones.

Multizone

Where present, this function allows the cooking zone to be used as two separate zones or as a single extra large zone.

It is perfect for oval, rectangular and elongated pans (with maximum base dimensions of 38x23 cm) or more than one standard pan

in the same time. In order to activate the Multizone, switch on the hob, press simultaneously the 2 selecting buttons of the zones

as shown in the picture below: the two cooking zone displays show level “0”; both dots next to the level number are lit, indicating

that the Multizone is activated.

- - M - -

To change the power level (from 1 to max. 9 or P) press the -/+ buttons or slide your nger horizontally on the slider. To deactivate

the Multizone, press simultaneously the 2 selecting buttons of the zones. To switch off the zones instantly, hold one of the zone

selection button for 3 seconds.

The message “no pot” will appear on the display of the zone that is not able to detect any pot (because of missing pot,

or misplaced or not suitable for induction hob). This message remains active for 60 seconds: in this time you can add or slide pots

within the Multizone area as you prefer.

After 60 seconds if no pan is placed on the zone, the system stops “searching” pots on that zone, the symbol remains visible

on the display to remind that the zone is disabled.

To reactivate the Multizone, press one of the 2 buttons

- - M - -

The Multizone is also able to detect when a pot is moved from one zone to the other one within the Multizone area keeping the

same power level of the zone where the pan originally was placed (see the example in the gure below: if the pot is moved from

the front heater to the rear heater, the power level will be shown on the display corresponding to the zone where the pot is placed).

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Whirlpool SIM562BSK Instrucciones de uso Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool SIM562BSK