Whirlpool SIM562BSK Instrucciones de uso descargar pdf (Pagina 9)

It is also possible to operate the Multizone as two independent cooking zones, using the corresponding button of the single zone.

Place the pot in the center of the single zone and adjust the power level with the slide touchscreen.

Important: Make sure to place the pans centered on the cooking zone in the way to cover the logo placed in the center

of the single cooking zone.

In case of big pot, oval, rectangular and elongated pans make sure to place the pans centered on the cooking zone covering both

logos.

Examples of good pot placement and bad pot placement :

CLEANING

- Do not use steam cleaners.

- Before cleaning, make sure the cooking zones are switched off and that the residual

heat indicator (“H”) is not displayed.

IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass.

• After each use, clean the hob (when it is cool) to remove any deposits and stains due to food residuals.

• Sugar or foods with a high sugar content damage the hob and must be immediately removed.

• Salt, sugar and sand could scratch the glass surface.

• Use a soft cloth, absorbent kitchen paper or a specic hob cleaner (follow the Manufacturer’s instructions).

TROUBLESHOOTING GUIDE

• Read and follow the instructions given in the section “Instructions for use”.

• Check that the electricity supply has not been shut off.

• Dry the hob thoroughly after cleaning it.

• If, when the hob is switched on, alphanumeric codes appear on the display, consult the following table for instructions.

• If the hob cannot be switched off after using it, disconnect it from the power supply.

ERROR CODE DESCRIPTION POSSIBLE CAUSES ERROR ELIMINATION

C81, C82

The control panel switches o

because of excessively

high temperatures

The internal temperature of

electronic parts is too high

Wait for the hob to cool down

before using it again.

F42 or F43

The connection voltage is wrong The sensor detects a discrepancy

between the appliance voltage

and that of the mains supply

Disconnect the hob from the mains

and check the electrical connection

F12, F21, F25, F36, F37, F40, F47, F56, F58, F60 Call the After-Sales Service and specify the error code

WARNING

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Whirlpool SIM562BSK Instrucciones de uso Pagina 9