Whirlpool ACM 372 D Instrucciones de uso descargar pdf (Pagina 22)

N C

M Y

INSTALLATION

LOCATION

The cooker has type “Y” overheating protection so that

it can be installed in a cabinet.

The kitchen furniture near the sides of the cooker

should be made of heat-resistant material.

AMENDED INSTRUCTIONS

ANTI-TILT BRACKET

This cooker must not be used until it has been

fastened to the anti-tilt bracket.

Attaching the anti-tilt bracket:

After you have located where the cooker is to be

positioned mark, on the wall, the place where the 2

screws of the anti-tilt bracket have to be fitted.

Please follow the dimensions given in the drawing

below.

Maketwoholesofdiameterø8mmonthewall

and insert the plastic plugs.

Move the cooker to the wall and adjust the height

of the anti-tilt bracket so that it can engage in one

slot of the cooker back.

Attach the anti-tilt brachet tightly.

Push the cooker against the wall so that the anti-tilt

bracket is fully inserted in one slot of the cooker

back.

Only for DENMARK

For 850 mm high cookers, an additional base can be

ordered separately which can be installed under the

cooker itself, thus bringing the overall height to

900 mm.

Cookers with plinth (H = 900 mm) A = 130 mm

Cookers without plinth (H = 850 mm) A = 80 mm

124

1 2 ... 17 18 19 20 21 22 23 24 25 26

Sin comentarios

Whirlpool ACM 372 D Instrucciones de uso Pagina 22