Whirlpool ACM 406/1 Instrucciones de uso descargar pdf (Pagina 26)

26

INSTRUCTIONS FOR THE INSTALLER

TECHNICAL INFORMATION

• The installation, adjustments, conversions

and maintenance operations listed in this

part must only be carried out by qualied

personnel. The manufacturer cannot be

held responsible for any damage to persons

or property resulting from an incorrect

installation of the appliance.

• The safety and automatic adjustment devices

of the appliances may, during its life, only

be modied by the manufacturer or duly

authorised supplier.

• In accordance with the standard, the

appliances are “class 2 subclass 1” (recessed)

and, as such, must comply with the clearances

specied in g. 10 and consequently any side

walls must be no higher than the work top.

• The walls adjacent to and surrounding

the appliances must be able to

withstand an temperature of 95°C.

• The installation of all-gas and combi

appliances must comply with the standards

in force.

• This appliance is not connected to a

ue for discharge of the combustion

products; therefore, it must be connected

in compliance with the above mentioned

installation rules. Particular attention must

be paid to the instructions given below for

ventilation and aeration.

INSTALLATION

UNPACKING YOUR COOKER

• Once the wrapping has been removed from

the outer surfaces and the various inner

parts, thoroughly check that the appliance is

in perfect condition.

If you have any doubts do not use the

appliance and call in a qualied person.

• Some parts mounted on the appliance are

protected by a plastic lm. This protection

must be removed before using the appliance.

We recommend slitting the plastic lm along

the edges with a sharp knife or pin.

• Do not move the appliance by the handle.







10

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

Comentarios a estos manuales

Sin comentarios