Whirlpool AMD 383 Instrucciones de uso descargar pdf (Pagina 15)

TIMER-ON

TIMER key

To operate the time on, press this button. Set the ON TIME within the range on 0-24 hours and the unit

will start automatically at the pre-set time.

TIMER-OFF

TIMER-OFF key

To operate the timer off, press this button. Set the OFF TIME within the range on 0-24 hours and the unit

will stop automatically at the pre-set time.

CLOCK

When you press this key, the icon will start to blink and enter the clock adjustment mode. In this mode

pressing the + button will increase the clock by 1 minute each time. If the + key is held down for 2

seconds or longer, the clock will increase by 10 minutes every half second.

Pressing the - key will decrease the clock by 1 minute each time. If the - key is held down for 2 seconds or

longer, the clock will decrease by 10 minutes every half second. After adjustment, press CLOCK again to

confirm. The icon will be constantly displayed.

After powered on, 12:00 is displayed as default and the icon is on.

If no key is pressed for 5 seconds after TIMER ON, TIMER OFF or CLOCK setup, the unit will exit setup

mode.

SLEEP

SLEEP key

Press this button, Sleep On and Sleep Off can be selected. After powered on, Sleep Off is defaulted. After

the unit is turned off, the Sleep function is cancelled.

After Sleep function set up, the signal of Sleep will display. In this mode, the time of timer can be adjusted.

Under Fan and Auto modes, this function is not available.

About lock

Press + and - buttons simultaneously to lock or unlock the keyboard. If the remote controller is locked,

the icon will be displayed on it, in which case, press any button, the mark will flicker for three times. If

the keyboard is unlocked, the mark will disappear.

About swing up and down

1. Press swing up and down button continuously more than 2s,the main unit will swing back and forth

from up to down, and then loosen the button, the unit will stop swinging and present position of guide

louver will be kept immediately.

2. Under swing up and down mode, when the status is switched from off to , if press this button again

2s later, status will switch to off status directly; if press this button again within 2s, the change of

swing status will also depend on the circulation sequence stated above.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Sin comentarios

Whirlpool AMD 383 Instrucciones de uso Pagina 15