Whirlpool AMD 383 Instrucciones de uso descargar pdf (Pagina 24)

Electric wiring connection

1. Remove the front side plate (fig. 33).

2. Break through the hole for wires and put on rubber bush.

3. Pull all wires through the rubber bush.

4. Connect the outdoor unit according to the "WIRING DIAGRAM" of outdoor unit. Make sure to wire

firmly.

5. Tighten the wires with clamp and clasp.

CAUTION

• Wrong wiring may cause fire of electric shock.

• Do not pull the wire when fixing it with wire clamp

and clasp.

• Do not let the wire too loose.

• All the electrical work must be done by qualified

personnel according to the local rules and this

instruction.

• The rated voltage and the exclusive circuit must be

used.

• Leakage circuit-breaker must be installed.

• Please use specified fuse.

• If the power supply cord of the unit is damaged, it

must be replaced by the manufacturer or its service

agent or a similarly qualified person in order to

avoid a hazard.

• An all-pole disconnection air switch which have a

contact separation of at least 3 mm in all pole is needed.

Schematic diagram of unit line connection

Electric wiring connection

AMD 382

1. Power cord 3×3.5mm

(H07RN-F)

2. Power cord 3×1.5mm

(H05RW-F)

3. Twisted-pair

AMD 382 - AMD 383 - AMD 384

Power supply terminal board

Front side plate

Rear side plate

Clamp

Clasp

Hole of wires and

rubber bush

Cords

POWER:

220-240V~

50Hz

Outdoor Unit

Indoor Unit

main board

POWER:

220-240V~

50Hz

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios

Whirlpool AMD 383 Instrucciones de uso Pagina 24

Comentarios a estos manuales