Whirlpool NIS952FB Instrucciones de uso descargar pdf (Pagina 8)

EN8

4. Secure the power cable with the cable clamp.

5. Close the cover (C) and screw it on the terminal block with the previously removed screw.

Each time the power is connected, the hob performs an automatic check for a few seconds.

Connect the appliance to the power supply by means of a multipole switch with minimum contact gap of 3mm.

INSTRUCTIONS FOR USE

Control Panel Description

The panel has touch controls: to use them, just press the corresponding symbol (a light touch is sufcient).

To select and activate the cooking zones

Hob ON/OFF

To set the minute

counter

To enable the hold

function

Slide touchscreen To lock the control panelTo select one of the automatic functions

To select the FLEXI ZONE function

To switch o the

single cooking zone

First use / after a power failure

After connecting the hob to the electrical power supply, the control panel is locked (the indicator light above the key is ON).

To unlock the control panel, press and hold the key for 3 seconds. The indicator light switches off and the hob can be used normally.

Switching the hob ON/OFF

To switch the hob on, press and hold the key for approx. 2 seconds: the indicator light above the key switches on and dashes appear inside the circles

indicating the cooking zones. To switch off, press the same button until the hob switches off. All the cooking zones are deactivated.

The hob automatically switches off if no function is selected within 10 seconds of switching on.

Switching the single cooking zone OFF

To switch the single cooking zone OFF, press the corresponding button.

The hob automatically switches off if no function is selected within 10 seconds of switching on.

Indicates that one of the automatic functions is On

Cooking zone timer

Cooking zone selection and selected cooking zone/power level display

Slide touchscreen (power adjustment)

After switching on the hob, position the pot on the chosen cooking zone.

Activate the cooking zone by pressing the corresponding circular key: the number 0 is displayed inside the circle, indicating the intermediate power level.

The hob automatically switches off if no function is selected within 10 seconds of switching on. If you are using a pot that is not suitable, not

correctly positioned or not of the correct dimensions for your induction hob, the message “no pot“ will appear in the display (see gure on the

left). If no pot is detected within 60 seconds, the hob switches off.

To change the power level, slide your nger horizontally on the slide touchscreen: the number inside the circle increases/decreases as your nger slides up/

down the touchscreen, ranging from a min. setting of 1 to a max. of 9. The slide touchscreen can be used to activate the booster function by pressing “BOOST”

(“P” on the display) The “BOOST“ power level can be used for 10 minutes maximum, after which the appliance automatically sets the power to level 9.

If more than one cooking zone is on, the slide touchscreen allows you to change the power level of the selected zone, indicated by the presence of a

luminous dot at the bottom right of the power level indicator. To select a zone, simply press the relative round key.