Whirlpool NIS952FB Instrucciones de uso descargar pdf (Pagina 9)

EN9

Deactivation of cooking zones

Select the cooking zone to be switched off by pressing the relative round key (a dot lights up at the bottom right of the power level indicator). Press OFF on

the slide touchscreen.

The cooking zone switches off and, if the zone is still hot, the letter “H“ appears in the circle.

“H“ is the residual heat indicator. The hob has such an indicator for each cooking zone; it signals which zones are still hot. When the cooking zone

cools down, the display goes off.

Timer selection

The timer can be used to set a max. cooking time of 90 minutes.

Select the cooking zone to be used with the timer (a dot lights up at the bottom right of the power level indicator), then set the required cooking time using the

+ and - keys of the timer function: the time is minutes is shown next to the cooking zone display.

A few seconds after the key is pressed, the timer begins the countdown (the luminous dot of the selected cooking zone starts ashing).

Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically.

Control panel lock

This function locks the hob controls to prevent accidental switching on (e.g. during cleaning operations).

Press the button for three seconds: a beep sounds and an indicator lights up above the padlock symbol to signal activation. The control panel is locked

except for the deactivation function. To deactivate the control lock, repeat the activation procedure. The luminous dot goes off and the hob is active again.

IMPORTANT: The presence of water, liquid spilled from pots or any kind of objects resting on the button under the symbol can accidentally activate or deactivate the

control panel lock function.

Hold

This function allows you to temporarily hold and then resume cooking processes maintaining previous settings (except for timer setting). Press the key :

ashes on the display in place of the power levels. To resume cooking, press the key again .

Description of automatic functions

The hob features automatic functions for each cooking zone. The symbols of the available functions are shown next to the selection key of each cooking

zone. Every time an automatic function is selected, an indicator light turns on next to the symbol and the letter “A“ appears in the cooking zone display.

Boiling Function

The BOILING function automatically selects the ideal power level to bring water to the boil and signals boiling point.

After positioning the pot of water, switch on the hob and select the desired cooking zone. Press the key : “A“ appears on the display and the indicator light turns

on. During heating, an animation is displayed in the space next to the cooking zone.

To ensure correct operation of the BOILING function, we recommend that you:

- use water only (at room temperature);

- do not add salt, other ingredients or condiments until the water reaches boiling point;

- do not change the power setting of the cooking zone or remove or move the pot;

- do not use pressure cookers;

- ll the pot to at least 1/3 full (min. 1 litre) and never to the brim (see table on the right).

For optimum results, observe the following advice:

- do not put the lid on the pot that is being used with the BOILING function;

- do not activate the BOILING function if the zone is already hot (letter “H“ on the display).

Cooking zone

diameter

Pan base diameter for

BOILING function use

Maximum amount

of water in the pot

18 cm 17-19 cm 5 litres

When the water comes to the boil, the hob emits an acoustic signal. This signal is sounded three times at regular intervals. After the second signal, a minute

minder is automatically activated to keep track of boiling time. After the third signal, the hob automatically selects a lower power setting to keep the water

simmering. From this moment on, you can add any ingredients you like, set the timer and change the power setting. Changing the power setting or selecting

the “hold” function overrides the BOILING function.

The function is deactivated when the “hold“ function is selected.

- The hob manages the BOILING function and booster levels autonomously, therefore, in some cases, it may not be possible to activate the booster with

the BOILING function already in use.

- The quality of the cookware may affect the performance of the BOILING function.

Simmering Function

After bringing the food to the boil, select the simmering function: a power level designed to maintain a gentle simmer is automatically set.To deactivate the

function simply press OFF on the slide touchscreen.

Melting function

The melting function maintains a low and even temperature in the cooking zone. After positioning the pot/accessory on the chosen cooking zone, switch on the

hob and select the cooking zone. Press the key : “A“ appears on the display and the indicator light turns on. To deactivate the function, simply press OFF

on the slide touchscreen.