Whirlpool EKB 3482/2481 Instrucciones de uso descargar pdf (Pagina 16)

- Locate properly the hole position that you

should make +/- 0.5 mm

- The frame of the hob should be able to rest

properly on the main top; therefore make

sure the opening is properly centered.

- Cover the opening sides with the ribbon to

protect the hob frame scratches.

- Brush with oil the cutted parts.

- Make a hole of ø 10-12 mm on each of the

4 internal angles.

- Cut with hand saw if you can not introduce

electric saw.

- Please use the saw with caution in order not

to damage the stainless steel surface, which

shall be difficult to fix if damaged.

After you finished with preparing the hob

opening hole, please make sure that the an-

gles, borders and surface are clean and

smooth.

- Insert under the steel border the wooden

pieces supplied with the hob, that should en-

able you to make a 30 to 50 mm thik border

frame.

- Under the stainless steel frame of the hob,

there is a rubber self adhesive gasket; to level

eventually any irregularity use mastic sealing.

Please dont use silicone, to avoid any prob-

lem in case you need to disassemble the hob

later.

- Introduce the hob, center it properly in order

all sides cover the openings.

- Screw and thigten the hob to the working

surface from under the hob as instructed

above and hereafter.

INSTALLATION

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 24 25

Sin comentarios

Whirlpool EKB 3482/2481 Instrucciones de uso Pagina 16