Whirlpool HJA1733 Instrucciones de uso descargar pdf (Pagina 10)

Key lock

This function locks the hob controls to prevent

accidental switching on. To activate the key lock

function, switch on the hob then press and hold the

button for three seconds: an acoustic signal and

a luminous indicator under the key symbol signal

activation. The control panel is locked with the

exception of the OFF function. To unlock the

controls, repeat the key lock activation procedure.

The illuminated dot switches off and the hob is active

again.

The presence of cleaning water, liquid spilled from

pots or any objects resting on the button below the

symbol can accidentally activate or deactivate the

key lock function.

Timer

The timer can be used to set a max.

cooking time of 99 minutes (1 hour

and 39 minutes) for one cooking zone

only.

Select the cooking zone to be used with the timer (an

illuminated dot appears to the bottom right hand

side of the heat setting indicator on the display), then

set the desired cooking time using the buttons “+”

and -“-” of the timer function (see figure above). A few

seconds after the button is pressed, the timer begins

the countdown (the luminous dot of the selected

cooking zone starts flashing). Once the set time has

elapsed, an acoustic signal sounds and the cooking

zone switches off automatically.

To deactivate the timer, press the button “-” until the

display shows “0:0” or press the buttons “+” and “-” of

the timer at the same time.

Important! The timer function can only be used with

one cooking zone at a time.

Minute minder

The minute minder can only be used when the hob is

not in use and allows a maximum setting of 99 min.

Press the button “+” below the timer indicators: the

display shows the minutes for setting.

Select the time desired using the buttons + and -.

After a few seconds the minute minder starts to

count down. Once the set time has elapsed an

acoustic signal sounds.

Important! The minute minder function can only be

used when the hob is switched off; if it is then

switched on, the minute minder countdown is

automatically cancelled.

Control panel indicators

Residual heat indicator

The hob is fitted with a residual heat indicator

for each cooking zone. These indicators alert the

user when cooking zones are still hot.

If the display shows , the cooking zone is still hot. If

the residual heat indicator of a given cooking zone is

lit, that zone can be used, for example, to keep a dish

warm or to melt butter.

When the cooking zone cools down, the display

switches off.

Incorrect or missing pot indicator

The hob features an automatic pot detection

system for all cooking zones. If no pot is

detected, the display with the cooking zone

power level indicator flashes. Make sure the pot is

correctly positioned and that it has the characteristics

given in the section “Before use”.

1 2 ... 5 6 7 8 9 10 11 12 13

Comentarios a estos manuales

Sin comentarios

Whirlpool HJA1733 Instrucciones de uso Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool HJA1733