Whirlpool KBT 6424 DO (BI) Instrucciones de uso descargar pdf (Pagina 19)

Safety devices

Acoustic signal

Some anomalies, such as:

• an object (pot, utensil, etc.) placed on the control

area for more than 10 seconds,

• a spillage on the control panel,

• sustained pressure on one of the keys, etc.

may cause the acoustic signal to go off.

Remove the cause of the malfunction to stop the acous-

tic signal. The hob remains locked; all you have to do is

unlock it to continues using it (the settings are saved). If

the cause of the malfunction is not eliminated, the acous-

tic signal will carry on, while the hob will switch off for

safety reasons.

Safety switch

The appliance comes with an automatic safety switch

which goes off after a certain time interval (see table) in

accordance with the selected power. During the safety

interruption, the letters “TI” and “ME” alternate on the

display.

for example: the right rear cooking zone is set on 5 and

the front left cooking zone is set on 2. The right rear

zone will switch off after 5 hours of operation, while the

left front zone will switch off after 6 hours of operation.

Power level Operating time limit in hours

110

3-4-5 5

7-8 3

9-10 2

11 1

Inactivity

If the plate is switched on but is not used for approximately

2 minutes, the control lock function will be enabled. If

the same status remains for approximately another 4

minutes, the plate will switch off automatically.

Overheating

Prolonged use of the hob may cause the electrical com-

ponents to overheat.

A thermal protection device temporarily induces reduced

power (3) on the front cooking zones until the tempera-

ture has come down to an acceptable level.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

Sin comentarios

Whirlpool KBT 6424 DO (BI) Instrucciones de uso Pagina 19