Whirlpool PRO95GT.01 /CY Instrucciones de uso descargar pdf (Pagina 4)

fig. 15

Burner Opening "X" (mm) liquid gas

Oven 16

Maintenance

The following maintenance work should be carried

out at least once a year:

 check that all regulating and safety devices are in

proper working order;

 check correct ignition, correct flame and good

combustion;

 clean burners, if necessary, as follows:

 remove the grids and burners;

 using water and detergent, clean the

disassembled burner parts, if necessary with the

help of specific equipment;

 replace the components, making sure that

they are positioned correctly;

 clean the oven and grill burners, if necessary,

checking that the gas outlet holes are not

clogged.

 check that the flue pipe draws well.

Electrical connection

Before connecting the appliance to the electricity

supply, make sure that:

 the voltage and frequency of the mains supply

corresponds to the values indicated on the rating

plate;

 the earthing system is efficient;

 the supply cable is fitted with a normalised plug

suitable for the rated current. At the time of

installation an efficient double-pole cut-off device

having a contact separation of at least 3 mm in

both poles should also be fitted upstream of the

appliance. The double-pole linked switch should

be near the appliance and readily accessible.

 the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the wires in the mains lead may

not correspond with the coloured markings

identifying the terminals in your plug, proceed as

follows:

Connect the Green & Yellow wire to terminal

marked E or

or coloured Green or Green &

Yellow.

Connect the Brown wire to the terminal marked L

or coloured Red.

Connect the Blue wire to the terminal marked N

or coloured Black.

 If the supply cable needs replacing, use a cable

of the type HO5VV-F with a cross section of 3x1

mm² in compliance with regulations in force.

Electrical connection

THE APPLIANCE MUST BE EARTHED

The appliance is designed to work with alternating

current at the supply voltage and frequency

indicated on the rating plate (situated on the rear

part of the appliance and on the last page of the

instruction booklet). Make sure that the local supply

voltage corresponds to the voltage indicated on the

rating plate.

Connecting the supply cable to the mains electricity

supply

If the appliance is provided with a cable with a plug,

you should position the former in such a was as to

make the plug accessible.

Connection and placing into operation must be

made by an qualified expert only.

This appliance are designed to operate at 220V~

50Hz (see data plate).

For models supplied without a plug, fit a standard

plug, suitable for the load indicated on the rating

plate, onto the cable and connect to a suitable

socket. To connect directly to the mains supply, a

double-pole switch with a contact separation of at

least 3 mm suitable for the load and complying with

current standards and regulations, must be fitted

between the appliance and the mains supply outlet.

The yellow-green earth wire must not be interrupted

by the switch. The supply cable must be in such a

position that no part of it can reach a temperature of

50 °C above room temperature.

WARNING:THIS APPLIANCE MUST BE EARTHED.

Before connecting to the power supply, make sure

that:

1) The limiter valve and the domestic system can

withstand the load from the appliance (see rating

plate);

2) The supply system is efficiently aerthed

according to standard and laws in force.

3) The socket or double-pole switch used in the

connection are easly accessible when the appliance

is installed.

The wires in the mains lead are coloured in

accordance with the following code:

Yellow-Green = Earth

Blue = Neutral

Brown = Live.

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Whirlpool PRO95GT.01 /CY Instrucciones de uso Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool PRO95GT.01 /CY