Whirlpool K 647 PS.C (X)/I Instrucciones de uso descargar pdf (Pagina 17)

flame is small but steady.

N.B.: In the case of liquid gas, the regulation screw

must be screwed in all the way.

• Check that the flame does not go out when you turn

the tap quickly from high to low.

d) Regulating the primary air of the burners: the primary

air of the burners does not need to be regulated.

Burner and Nozzle Specifications

Table 1 Liquid Gas Natural Gas

Burner Diameter

(mm)

Thermal Power

kW (p.c.s.*)

By-Pass

1/100

Nozzle

1/100

Flow*

g/h

Nozzle

1/100

Flow*

l/h

Nominal Reduced (mm) (mm) *** ** (mm)

Fast (R) 100 3,00 0,70 41 86 218 214 116 286

Semi Fast (S) 75 1.90 0.40 30 70 138 136 106 181

Auxiliary (A) 55 1.00 0.40 30 50 73 71 79 95

Triple Crown

(TC)

130 3.25 1.50 63 91 236 232 133 309

Supply

Pressures

Nominal (mbar)

Minimum (mbar)

Maximum (mbar)

28-30

* At 15°C and 1013 mbar- dry gas

** Propane P.C.S. = 50.37 MJ/kg

*** Butane P.C.S. = 49.47 MJ/kg

Natural P.C.S. = 37.78 MJ/m

K 647 PS.C/I

Important

On completion of this operation, replace the old rating

sticker with one indicating the new type of gas used. This

sticker is available from our Service Centres.

Note

Should the pressure of the gas used be different (or vary)

from the recommended pressure, it is necessary to fit a

suitable pressure regulator onto the inlet pipe in compli-

ance with current standards regarding “regulators for chan-

nelled gas.”

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Whirlpool K 647 PS.C (X)/I Instrucciones de uso Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool K 647 PS.C (X)/I