Whirlpool TVL 642 IB Instrucciones de uso descargar pdf (Pagina 21)

Extending the cooking zones

A button allows the user to extend the relevant

cooking zones (these may be concentric or oval).

1. Press the

button to activate the hotplate, then

set the power to the required level using the

and buttons.

2. Press the

or button to switch on the entire,

fully-extended cooking zone.

To return to using the smaller cooking zone, simply

press the extension button again.

The indicator light above the extendable cooking

zone button remains lit for the entire time during

which the large surface is being used.

Switching off the cooking zones

 Press the button at the side of the power level

indicator: the power of the cooking zone will

progressively decrease until it is switched off.

 Alternatively, the

and buttons may be pressed

simultaneously. The cooking zone will switch off.

Programming the cooking zones

Cooking programme duration

 The cooking zone must be switched on.

 All the cooking zones may be programmed for a

length of time between 1 minute and 3 hours.

1. Press the

button at the side of

the display which corresponds to the hotplate you

wish to programme.

2. Press the

and buttons at the side of the

display to select the DURATION command and

press OK to confirm.

3. Adjust the minutes by pressing the

and buttons.

4. Press OK to confirm.

5. Select the EXIT command and press OK to

confirm. This setting will be memorised.

 If the setting is not confirmed by pressing the OK

button within 20 seconds, the duration will be

memorised automatically.

 During the setting process, press the

and buttons

at the side of the display to reset the time value to zero.

The timer begins counting down immediately. A buzzer

sounds for approximately 1 minute and the cooking

zone switches off when the set programme has finished.

Repeat the above procedure for each hotplate you

wish to programme.

 The buzzer may be stopped by pressing any

button on the hob.

Turbo

Reduces the time needed to reach the set power level.

The cooking zone must be switched on.

1. Press the

button at the side of

the display which corresponds to the hotplate you

wish to programme.

2. Press the

and buttons at the side of the

display to select the TURBO command and press

OK to confirm.

3. Select the ON option by pressing the

and

buttons and press the OK button to activate the

turbo function.

4. Select the OFF option by pressing the

and

buttons and press the OK button to stop the turbo

function.

5. Select the EXIT command and press OK to

confirm. This setting will be memorised.

Power level

 The cooking zone must be switched off.

Enables a pre-set power level top be selected when

the cooking zone is switched on.

1. Press one of the

buttons at the

side of the display corresponding to the hotplate

you wish to programme.

2. The display will show the menu dedicated to that

cooking zone.

3. Press the

and buttons to select the POWER

LEVEL command and press OK to confirm.

4. The display will present the following options:

DEFAULT: factory setting

HIGH: maximum power

MEDIUM: 50% power

LOW: minimum power.

5. Press the

and buttons to select the desired option

and press OK to confirm. This setting will be memorised.

6. Select the EXIT command and press OK to confirm.

For example: if the MEDIUM option has been

selected by pressing the

or buttons at the side

of the power level indicator, the hotplate will switch

on at half power.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 67 68

Comentarios a estos manuales

Sin comentarios

Whirlpool TVL 642 IB Instrucciones de uso Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool TVL 642 IB