Whirlpool TVL 642 IB Instrucciones de uso descargar pdf (Pagina 23)

Demo mode

The hob is able to operate in DEMO mode: all

heating elements are deactivated, and controls

remain operative.

To activate the DEMO mode:

1. Switch on the hob

;

2. Press the

and buttons simultaneously

and hold for 6 seconds. A buzzer sounds and the

display shows the text DEMO ON.

3. The hob is now operating in Demo mode.

To deactivate the DEMO mode:

1.To deactivate the DEMO mode

;

2. Press the

and and buttons in sequence,

then press the button and hold for 2 seconds. A

buzzer sounds and the display shows the text

DEMO OFF.

3.The hob will now operate normally.

Switching off the hob

Press the button to switch the appliance off.

If the control panel lock has been activated, the

controls will continue to be locked even after the hob

is switched on again. In order to switch the hob on

again, you must first remove the lock function.

Practical advice on using the appliance

To obtain the best results from your hob:

Use pans with a thick, flat base to fully utilise the

cooking zone.

 Always use pans with a diameter that is large

enough to cover the hotplate fully, in order to use

all the available heat.

 Make sure that the base of the cookware is

always dry and clean, to fully utilise and extend

the life of both the cooking zones and cookware.

 Avoid using the same cookware that has been

used on gas burners: the heat concentration on

gas burners may distort the base of the pan,

causing it not to adhere correctly.

Safety devices

Residual heat indicators

After the pan has been removed from one of the

cooking zones, part of the power level indicator will

flash while the temperature of that particular zone

remains above 60°C. This reduces the risk of burns

and scalds.

Overheating protection

If the electronic components overheat, the hob

switches off automatically and the power level

indicator will show the two external parts or the two

internal and the two external parts as active. When

the temperature has reached a more appropriate

level, this message disappears and the hob may be

used again.

Safety switch

The appliance has a safety switch that automatically

switches off the cooking zones when they have

been

in operation for a certain amount of time at a given

power level. When the safety switch has been

triggered, the display shows 0.

For example: the right rear hotplate is set to 5 and

will switch off after 3 hours of continuous operation,

while the front left hotplate is set to 2 and will switch

off after 10 hours.

Buzzer

Can also indicate several irregularities:

 An object (a pan, cutlery, etc.) has been placed

on the control panel for more than 10 seconds.

 Something has been spilt on the control panel.

 A button has been pressed for too long.

All of the above situations may cause the buzzer

to sound. Remove the cause of the malfunction to

stop the buzzer. The control panel locks

automatically in the above situations. T

o unlock it

press the [key icon] button, the settings will have

been maintained. If the cause of the problem is

not removed, the buzzer will keep sounding and

the hob will switch off.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

Comentarios a estos manuales

Sin comentarios

Whirlpool TVL 642 IB Instrucciones de uso Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Whirlpool TVL 642 IB