Whirlpool ACM 227 IX Instrucciones de uso descargar pdf (Pagina 10)

10 /EN

3 Installation

Product must be installed by a qualified

person in accordance with the

regulations in force. The manufacturer

shall not be held responsible for

damages arising from procedures

carried out by unauthorized persons

which may also void the warranty.

Preparation of location and

electrical and gas installation for

the product is under customer’s

responsibility.

DANGER

The product must be installed in

accordance with all local gas

and/or electrical regulations.

DANGER

Prior to installation, visually

check if the product has any

defects on it. If so, do not have it

installed.

Damaged products cause risks for

your safety.

Before installation

To ensure that critical air gaps are

maintained under the appliance, we

recommend that this appliance is

mounted on a solid base and that the

feet do not sink into any carpet or soft

flooring.

The kitchen floor must be able to carry

the weight of the appliance plus the

additional weight of cookware and

bakeware and food.

• It can be used with cabinets on

either side but in order to have a

minimum distance of 400mm above

hotplate level allow a side clearance

of 65mm between the appliance and

any wall, partition or tall cupboard.

• It can also be used in a free

standing position. Allow a minimum

distance of 750 mm above the hob

surface.

• (*) If a cooker hood is to be installed

above the cooker, refer to cooker

hood manufacturer' instructions

regarding installation height (min

650 mm).

• The appliance corresponds to

device class 1, i.e. it may be placed

with the rear and one side to kitchen

walls, kitchen furniture or equipment

of any size. The kitchen furniture or

equipment on the other side may

only be of the same size or smaller.

• Any kitchen furniture next to the

appliance must be heat-resistant

(100 °C min.).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 174 175

Comentarios a estos manuales

Sin comentarios