Whirlpool ACM 355/BA/WH Instrucciones de uso descargar pdf (Pagina 10)

EN 19

Switching off cooking zones

Select the cooking zone to be switched off by pressing the relative round key (a dot lights up at the bottom right of the power level indicator). Press OFF on

the slide touchscreen.

The cooking zone switches off and, if the zone is still hot, the letter “H” appears in the circle.

“H” is the residual heat indicator. The hob is tted with a residual heat indicator for each cooking zone; these indicators alert the user when

cooking zones are still hot. When the cooking zone cools down, the display switches off.

Selezione del timer

The timer can be used to set a max. cooking time of 90 minutes.

Select the cooking zone to be used with the timer (a dot lights up at the bottom right of the power level indicator), then set the required cooking time using the

+ and - keys of the timer function: the time in minutes is shown next to the cooking zone display.

A few seconds after the key is pressed, the timer begins the countdown (the luminous dot of the selected cooking zone starts ashing).

Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically.

For use if the timer in conjunction with the sixth sense function, see the description of the function in subsequent pages.

Control panel lock

This function locks the hob controls to prevent accidental switching on (e.g. during cleaning).

Press the key for three seconds : an acoustic signal sounds and an indicator light turns on above the lock symbol to conrm activation. The control panel

is locked with the exception of the OFF function. To unlock the controls, repeat the child safety activation procedure. The illuminated dot switches off and the

hob is active again.

IMPORTANT: The presence of water, liquid spilled from pots or objects of any nature resting on the key below the symbol can accidentally activate or deactivate

the Control panel lock function.

Hold

This function allows you to temporarily hold and then resume cooking processes, maintaining previous settings (except for the sixth sense function and any set

timers). Press the key : blinks on the display in place of the power levels. To resume cooking, press the key again .

Flexi cook

This function allows you to use the cooking area as two separate cooking zones or as an extra-large single zone.

It is perfect for oval, rectangular and elongated pans (with maximum base dimensions of 38x18 cm) or more than one standard pan. In order to activate the

exicook function, switch on the hob and press the button : the two cooking zone displays show level “5”; both dots next to the level number are lit, indicating

that the Flexi cook is activated.

To change the power level, move your nger along the slide touchscreen: the number inside the circle will change with just a quick slide of the nger from a

minimum of 1 to a maximum of 9. To deactivate the exible zone function, press the key : the cooking zones revert to operating singly again. To switch

the cooking zone off, press OFF.

The message “no pot” cwill appear on the display of the zone that is not able to detect any pot (because of missing pot, or misplaced or not

suitable for induction hob). This message remains active for 60 seconds: in this time you can add or slide pots within the exicook area as you prefer.

After 60 seconds if no pan is placed on the zone, the system stops “searching” pots on that zone, the symbol remains visible on the display to remind that

the zone is disabled.

To reactivate the Flexicook function on both heaters, press the button .

The Flexi cook function is also able to detect when a pot is moved from one zone to the other one within the exi cook area keeping the same power level of

the zone where the pan originally was placed (see the example in the gure below: if the pot is moved from the front heater to the rear heater, the power level

will be shown on the display corresponding to the zone where the pot is placed).