Whirlpool ACM 355/BA/WH Instrucciones de uso descargar pdf (Pagina 12)

EN 21

Melting

This function maintains a permanently low temperature in the cooking zone. After positioning the pot/accessory on the chosen cooking zone, switch on the

hob and select the cooking zone. Press the key: “A” appears on the display and the indicator light turns on. To deactivate the function, simply press OFF

on the slide touchscreen.

CLEANING

WARNING

• Never use steam cleaners.

• Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”) is not

displayed.

IMPORTANT: do not use abrasive sponges or pan scourers. as they could ruin the glass surface.

• Clean the hob, when it is cool, after each use in order to remove any food residues.

• Sugar and foods with a high sugar content damage the glass ceramic surface and must be immediately removed.

• Salt, sugar and sand can scratch the glass surface.

• Use a soft cloth, absorbent kitchen wipes or a specic hob cleaner (follow the Manufacturer’s instructions).

TROUBLESHOOTING GUIDE

• Read and follow the instructions given in the section “Instructions for use”.

• Check that the electricity supply has not been shut off.

• Clean the hob and dry it thoroughly.

• If, when the hob is switched on, alphanumeric codes appear on the display, consult the following table for instructions.

• If you are unable to turn the hob off after using it, disconnect it from the power supply.

ERROR CODE DESCRIPTION POSSIBLE CAUSES REMEDY

The hob switches off and after 10

seconds emits an acoustic signal

every 30 seconds.

Continuous pressure on control

panel area.

Water or utensils on control panel. Clean the control panel.

C81, C82, C83

The control panel switches off

because of excessively high

temperatures.

The internal temperature of

electronic parts is too high.

Wait for the hob to cool down before

using it again.

F42 or F43 The connection voltage is wrong.

The sensor detects a discrepancy

between the appliance voltage and

that of the mains supply.

Disconnect the hob from the mains

and check the electrical connection.

F12, F21, F25, F36, F37, F40, F47,

F56, F58, F60, F61, F62, F63, F64

Call the After-sales Service and specify the error code.

AFTER-SALES SERVICE

Before contacting After-sales Service

1. See if you can solve the problem yourself with the help of the suggestions given in the “Troubleshooting guide”.

2. Switch the appliance off and then on again it to see if the problem has been eliminated.

If after the above checks the fault persists, contact the nearest After-sales Service.

Always specify:

• a brief description of the fault;

• the type and exact model of the hob;

• the Service number (the number after the word Service on the rating plate) located under the appliance (on the metal plate);

• your full address;

• your telephone number and area code.

If any repairs are required, please contact an authorised After-Sales Service (to guarantee that original spare parts will be used and repairs carried out

correctly). Spare parts are available for 10 years.